Device control

Your connected home

Loading…

Add a supported device, assign its room and choose whether to allow real commands. Model devices are labelled simulated; their controls affect only the model.

Managed devices and controls

Loading connected monitors…

AirGradient air-quality monitors

Connect a Wi-Fi-configured monitor directly through AirGradient’s cloud. No additional hub or Home Assistant installation is needed for this route.

If you already use Home Assistant for your monitor, its existing room-mapping route remains available in the home view.

Add or manage devices

After pairing, return here and choose Refresh devices to assign the device to a room.

Lights, switches, thermostat setpoints and energy/power sensors are supported by this first implementation. New hardware must be paired with its integration before it can appear here. Compatibility is awaiting testing with users’ equipment.

Metered plugs on your Home Assistant

Metered-plug recording is not active yet. Choose Check metered plugs to see whether the pilot is available for your home. When enabled, first pair a metered plug with your own Home Assistant installation, then name it and assign its room above. The read-only path records new readings only when you choose Record current readings after a separate V2 research-history choice for that plug. It does not operate the plug or use the shared Home Assistant backend.

Choose a home to check its metered plugs.