recoheat.app

Add device

Connect a device to your home

Choose your home, connect your device and assign its room. You use your Recoheat.app account throughout.

Loading your homes…

AirGradient ONE

Bring your monitor’s air-quality readings into your home dashboards.

  1. Get the monitor online using your home Wi-Fi.
  2. Check that readings appear in your AirGradient account.
  3. Connect it here and choose the room it monitors.

You’ll need your AirGradient API token. On the next screen, choose Find my monitors, select your monitor and assign its room. You can also enter its Location ID manually if needed. No separate Home Assistant account is needed.

Devices through Home Assistant

If you already have Home Assistant, connect that installation to your selected home. Then use Recoheat’s device setup below to run supported Home Assistant integration steps, check the reported state, and assign the device to a Recoheat room. Some hardware requires a compatible coordinator or a setup step that must still be completed in Home Assistant.

Device control can show lights, switches, thermostat targets and power or energy sensors once they are available in the connected installation. Control remains an explicit permission, and a saved assignment does not verify the physical device.

Choose a home to check its HA devices.

I already use Home Assistant

Before connecting, install Recoheat’s small identity companion in your Home Assistant configuration. It gives this installation a stable identifier so that another account cannot claim it through a different web address. Installation steps. An administrator of that installation must authorise the connection; do not enter its password here.

Set up a device on your Home Assistant

If you connected your own installation above, choose its integration here. Recoheat shows supported setup steps without asking for your Home Assistant password. When setup completes, open Device control to name the device and assign its room. Metered-plug recording is not active yet.